| |
| Media Center |
| |
Print Product Brochure |
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
| Wheel Wells |
| 10 in. Deep |
| Bottom Tray 100 in. Long |
|
|
|
| DECK |
- 1/4 in. Steel Diamond Plate Decking
- 102 in. Overall Deck Width
- 2 in. Square Tubing on 8 in. Centers
- 10 in. Deep Bull Dog Wheel Wells
- Bottom of Tray Length: 100 in.
- Width: 31-1/4 in.
- Overall Length of Tray: 142 in.
- Rear Wheel Well Angle: 15°
- (4) Pair of Key Slots in Bull Dog Wheel Wells
- Tie Down Key Slots (4-Front, 4 Rear)
- Dual Deck Chain Trays
- Stake Pockets Full Length
- Heavy Duty Tapered Approach Plate
- Full Height Steel Cab Protector
- Standard Paint Color (Black)
- 20,000 lbs. Worm Gear Winch
- 50 ft. of 5/8 in. Winch Cable
- Cable Tensioner
- Anti-Tilt Deck Feature
|
| SUBFRAME |
- 15 Ton HD Rigid Reinforced Tubular Subframe
- Integrated Low Profile Subframe
- Dual Illuminated Control Stations
- Replaceable High Performance Slide Pads
- Rear Hydraulic Stabilizer
- Danco Mud Flaps
|
|
|
| HYDRAULICS |
- Hydraulic Oil Reservoir
- 10 Micron Oil Filter with Cartridge
- Hydraulic Shut-Off Valve
- Hydraulic Pump
- Aeroquip Abrasion Resistant Hydraulic Hose
- Plastic Tracking System for Hoses and Wires
- Extra Length Push-Off Cylinder
- Two Power Lift In-Board Cylinders
- Chrome Plated Cylinder Rods
- Counterbalance Valves
|
| ELECTRICAL |
- Federal Standard 108 Lighting
- LED Light Package
- Weather Resistant Electrical System
- Back Up Lights
- Interstate Commerce Commission Lights
- Back-Up Alarm
|
| GENERAL |
- Dual Adjustable Deck Hold Downs
- Lubrication Fittings on All Pivot Points
- State of the Art Paint Processing
- All Components for Complete Installation
- Field Installation and Tested
|
|
 |
|
- Two Gear Power Take-Off with Indicator Light
- Cable / Hot / Air / Hydro Shift Options
- Bull Dog Wheel Well Covers
- Rumber Decking
- 5/4 in. Wood Deck
- 3/16 in. Steel Diamond Plate Over Wood
- 3/16 in. Smooth Steel Over Wood
- 1/4 in. Steel Decking
- Non-Skid Deck Applicant
- Paint Other Tahan Standard
- Additional Tie Down Slots
- Heavy Duty Full Height Industrial Cab Protector
- Screen in Cab Protector
- Enclosed Cab Protector at Bottom
|
|
|
- Dual Propane Tank Holders with Chain Rack
- Folding Deck Ladder
- Forklift Guard (Heavy Duty Bumper)
- D-Rings
- Frame Mounted Cab Protector
- Marker Light Package in Cab Protector
- 30,000 lbs. Worm Gear Winch
- Cable Tensioner
- Wireless Remote Control for Winch
- Tool Boxes
- Wrecker Special Light Bar
- Work Lights
- Factory Installation
- Other Options Available Upon Request
|
|
|
| MODEL |
DECK LENGTH |
CAB TO TANDEM |
| 2815TBD |
28 ft. |
204 - 208 in. |
| 2915TBD |
29 ft. |
216 - 220 in. |
| 3015TBD |
30 ft. |
228 - 232 in. |
| Deck Width (Outside) |
102 in. |
| Deck Width (Inside) |
92 in. |
| Decking |
3/16 in. Steel Diamond |
| Winch Rating (first layer) |
20,000 lbs. |
| Winch Cable |
50 ft. of 5/8 in. |
| Controls |
Dual Control Stations |
| Minimum G.V.W.R. |
33,000 lbs. |
|
Gross vehicle rating limitation must be considered. Ratings are based on structural factors only.
not chassis capacity.
Danco specifications shown are approximations and may vary depending on chassis
selected.
Danco's body ratings are based on a water level capacity. Product specifications are subject to
change without notice. Some optional equipment may be shown in photographs.
All prices are installed, Freight on Board Greencastle, PA |
|
|
