Bull-Dog

Brute Strength

Tough Enough To
Get It Done

The Power To Do More

STANDARD EQUIPMENT

Deck

3/16 Inch Steel Diamond Plate Deck
2 Inch Square Tubing on 8 Inch Centers
10 Inch Deep Bull Dog Wheel Wells
   - Bottom of Tray Length: 100" / Width: 31-1/4"
   - Overall Length of Tray: 142"
   - Rear of Bull Dog Wheel Well Angle: 15º
(4) Pair of Key Slots in Bull Dog Wheel Wells
Tie Down Key Slots (4-Front, 4 Rear)
Driver and Passenger - Chain Trays
Stake Pockets Full Length
Heavy Duty Tapered Approach Plate
Steel Bolt-On Cab Protector
Standard Paint Color: (Grey or Black)
20,000 Pound Worm Drive Winch
50 Feet of 5/8 Inch Winch Cable
Spring Loaded Cable Tensioner
Bed Anti-Tilt Feature

Subframe

15 Ton HD Rigid Reinforced Tubular Subframe
Integrated Low Profile Subframe
Driver and Passenger Side Illuminated Controls
Lubricated Control Handles
Replaceable High Performance Slide Pads
(2) Danco Mud Flaps

Hydraulics

Hydraulic Oil Reservoir
Oil Filter with Cartridge
Hydraulic Pump
Aeroquip Abrasion Resistant Hydraulic Hose
Flexible Hose and Wire Tracking System
Extra Length Push-Off Cylinder
Two Power Lift In-Board Cylinders
Chrome Plated Cylinder Rods

Electrical

Federal Standard 108 Lighting
Weather Resistant Electrical System
Back-Up Lights
Interstate Commerce Commission Lights
Back-Up Alarm

General

Dual Adjustable Positive Hold Downs
Lubrication Fittings on All Pivot Points
State of the Art Paint Facility
All Components for Complete Installation
Field Installation and Tested

For More Information:
Printable Version of 15 Ton Bull Dog

Printable Version of 15 Ton Bull Dog

OPTIONAL EQUIPMENT

Two Gear Power Take-Off w/ Warning Light
Air Shift PTO
Bull Dog Wheel Well Covers
NEW Rumber Decking
5/4 Inch Apitong Wood Deck
Paint Other Than Standard
Non-Skid Deck Applicant
Additional Tie Down Key Slots
Heavy Duty Industrial Cab Protector
Screen In Cab Protector
Enclosed Cab Protector at Bottom
3/16 Inch Steel Diamond Plate Over Wood
3/16 Inch Smooth Steel Over Wood
1/4 Inch Steel Decking
Dual Propane Tank Holders with Chain Rack

Folding Deck Ladder
Forklift Guard (Heavy Duty Bumper)
D - Rings
Frame Mounted Cab Protector
Marker Light Package In Cab Protector
30,000 Pound Worm Gear Winch
Spring Loaded Cable Tensioner Plate
Hand Held Wireless Remote Control for Winch
30 or 48 Inch Tool Box with Locking Latch
Hydraulic Stabilizer Bar
Wrecker Special Light Bar w/ Three Inch Risers
Work Light Package
Factory Installation

Many Other Popular DANCO Accessories Upon Request

SPECIFICATIONS

Model	Deck Length	Cab To Tandem
2815TBD	28'	204" - 208"

Load Rating: (Based On Water Level Load)
Minimum Loading Angle:
Maximum Bed Angle:
Decking:
Deck Width: Over All Width
Deck Extension:
Winch Rating: (1st Layer)
Winch Cable:
Working Limit:
Controls:
Minimum G.V.W.
Maximum G.V.W.

30,000 Pounds
12°
17°
3/16" Steel Diamond Plate
102"
123.5"
20,000 lbs.
50' x 5/8" Diameter

Driver and Passenger Side Controls
33,000 lbs.

Gross vehicle weight rating limitation must be considered. Ratings are based on structural factors only,
not chassis capacity. Danco specifications shown are approximations and may vary depending on chassis
selected. Danco's body ratings are based on a water level capacity. Product specifications are subject to
change without notice. Some optional equipment may be shown in photographs.
All Prices Are Installed, Freight On Board Greencastle, PA

411 South Cedar Lane
Greencastle, PA 17225
Phone: (717) 597-7185
1-800-453-2626
Fax: (717) 597-7106
E-mail: danco@innernet.net